Paul Components High Flange Track Rear Hub 28H Fixed Polished
Paul Components High Flange Track Rear Hub 28H Fixed Polished
In stock
Couldn't load pickup availability
Paul Components High Flange Track Rear Hub: a modern classic for your fixed gear wheel
Few components lift a track build like a polished high flange hub. Paul machines each shell from a three inch bar of 6061 aluminium in four separate operations, then cuts six windows into the large flanges to save weight and nod to the classic track hubs of the past.
This version is threaded for a fixed cog only, with proper left hand lockring threading and a heavy duty stainless steel lockring included. The axle is ground from 7075 aluminium, the knurled steel lock nut faces bite firmly into dropouts, and high fill sealed bearings keep it rolling smoothly for years.
Why riders choose it
- Large 65mm flanges with classic six window design
- Dedicated fixed threading with lockring included
- 7075 aluminium axle and knurled steel lock nuts
- High fill sealed bearings, chamfered spoke holes
- Handmade in Chico, California
Specifications
- Type: rear track hub, single fixed
- Drilling: 28 holes
- Spacing: 120mm
- Shell: 6061 aluminium, polished
- Axle: 7075 aluminium, bolt on
- Bearings: high fill sealed cartridge
- Flange diameter: 65mm
- Centre to flange: 32.5mm
- Fixed chainline: 44mm
- Threading: 1.37 x 24 tpi cog, 1.29 x 24 tpi lockring
- Weight: 289g
- Origin: made in Chico, California, USA
- Warranty: 2 year EU legal guarantee
FAQ
Can I run a freewheel on it?
No. This is the single fixed version; a flip flop version exists with freewheel threading on the other side.
Is it compatible with my frame?
It fits frames and forks with 120mm rear spacing, the standard for track and fixed gear bikes.
Which chainline will I get?
44mm for the fixed cog. Match it with a crankset designed for a track chainline.
Can you build a wheel with it?
Yes. Our workshop at L'Hirondelle Bike Shop in Meppel can build a 28 hole wheel around this hub with the rim of your choice.
Paul Component
At Paul component designing, testing and manufacturing their own bike parts has been going on for over twenty years. Brakes, hubs and more are machined in their own factory in Chico, California.




