{"product_id":"wilde-moto-cruiser-fork","title":"Wilde Moto Cruiser Fork — 26in Rigid Steel, Rim Brake, 420 mm Axle to Crown","description":"\u003ch2\u003eWilde Moto Cruiser Fork — the rigid 26in fork that brings an old mountain bike back to life\u003c\/h2\u003e\n\n\u003cp\u003eThere is a particular kind of bicycle sitting in sheds all over Europe: a good steel or aluminium mountain bike frame from the nineties or early two-thousands, sound in every respect, wearing a suspension fork that stopped working a decade ago. Or wearing nothing at all, because the fork was stripped for parts and never replaced. Wilde built this fork for exactly that frame.\u003c\/p\u003e\n\n\u003cp\u003eFit it and the bike becomes something else entirely: light at the front, direct in the steering, silent, and free of the seals, oil and service intervals that made the old fork a liability. Not a downgrade — a conversion. An efficient, reliable, genuinely fun town bike or gravel-path machine built from something you already own.\u003c\/p\u003e\n\n\u003ch3\u003eSuspension corrected, so the geometry survives\u003c\/h3\u003e\n\n\u003cp\u003eThe critical number is \u003cstrong\u003e420 mm axle to crown\u003c\/strong\u003e, matched to an 80 mm travel suspension fork at roughly its sag point. That is what makes this a straight swap rather than a compromise: the front end stays where the frame designer put it, the head angle stays where it was, and the bike handles as intended instead of sitting nose-down with a steep, twitchy front.\u003c\/p\u003e\n\n\u003cp\u003eThe 42 mm rake is standard for the era and keeps trail figures sensible on nineties and two-thousands cross-country geometry. The steerer arrives at 350 mm, long enough for any head tube and stack you will meet, and is cut to length on fitting.\u003c\/p\u003e\n\n\u003ch3\u003eRoom for a proper tyre, and somewhere to put luggage\u003c\/h3\u003e\n\n\u003cp\u003eClearance runs to \u003cstrong\u003e26 x 2.5in\u003c\/strong\u003e — considerably more than most rigid forks of this length, and enough to run a fat, low-pressure tyre that does much of the comfort work the old suspension used to do. A mid-blade rack mount takes a low rider or a platform rack, which turns the conversion into a commuter or a light tourer rather than just a tidier mountain bike.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e chromoly steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel size:\u003c\/strong\u003e 26in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle to crown:\u003c\/strong\u003e 420 mm, suspension corrected for an 80 mm fork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake (offset):\u003c\/strong\u003e 42 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteerer:\u003c\/strong\u003e 1 1\/8in threadless, 350 mm length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub spacing:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake type:\u003c\/strong\u003e canti studs — cantilever or V-brake, no disc mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTyre clearance:\u003c\/strong\u003e 26 x 2.5in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts:\u003c\/strong\u003e mid-blade rack mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e black or chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e Taiwan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Wilde Bicycle Co. manufacturer warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included\u003c\/h3\u003e\n\n\u003cp\u003eThe fork only. Headset, crown race, star nut or expander, brakes and cable hangers are sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eThe bike it was drawn for\u003c\/h3\u003e\n\n\u003cp\u003eThis is the fork supplied with the \u003ca href=\"\/products\/wilde-moto-cruiser-frameset-purple-pizazz\"\u003eWilde Moto Cruiser frameset bundle\u003c\/a\u003e, sold on its own here — as a spare, as a contrast finish, or far more often as a retrofit to somebody else's frame. Pair it with the \u003ca href=\"\/products\/wilde-moto-cruiser-bar\"\u003eWilde Moto Cruiser Bar\u003c\/a\u003e and an old cross-country bike gets both ends of the Moto Cruiser treatment: rigid and direct at the front, tall and swept at the hands.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill it fit my old mountain bike?\u003c\/strong\u003e\u003cbr\u003eThree checks. Your frame needs a straight 1 1\/8in head tube, threadless — not a threaded quill setup and not a tapered modern one. Your front hub must be 100 mm quick release or bolt-on. And your frame should have been designed around an 80 mm suspension fork or a rigid fork of about 420 mm. Most nineties and early two-thousands cross-country frames tick all three. Send us the model and year and we will confirm before you order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMy frame originally had a 100 mm or 120 mm fork. Can I still use this?\u003c\/strong\u003e\u003cbr\u003eYou can, but the front will drop by roughly 20 to 40 mm, steepening the head angle and quickening the steering. On a town conversion many people like the result; on anything ridden fast downhill it will feel nervous. If your frame was drawn around 100 mm or more, tell us and we will talk it through honestly rather than sell you a fork that changes the bike more than you want.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I fit a disc brake?\u003c\/strong\u003e\u003cbr\u003eNo. There are canti studs and no disc mount, and no safe way to add one. If your frame and wheels are set up for discs at the front, this fork is not the right part. Cantilever or V-brake only.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need a new headset?\u003c\/strong\u003e\u003cbr\u003eNot necessarily, but you will need a crown race that fits this fork and a headset in good condition. If the old fork came out with a worn or pitted headset, replace it while everything is apart — it is a fraction of the cost of doing the job twice.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack or chrome?\u003c\/strong\u003e\u003cbr\u003eBlack disappears onto almost any frame, including repaints and faded metallics. Chrome suits a polished build or a period-correct restoration, and matches a chrome Moto Cruiser Bar. Both cost the same here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan you fit it for me?\u003c\/strong\u003e\u003cbr\u003eYes. Our workshop at L'Hirondelle Bike Shop in Meppel cuts steerers, presses crown races, fits headsets and sets up cantilever and V-brakes as routine work, and we can check the frame's original fork length before anything is cut. Bring the bike in or send us the frame — a steerer cut wrong is a steerer cut once.\u003c\/p\u003e","brand":"Wilde","offers":[{"title":"Black","offer_id":54884792729941,"sku":"FKWM1067","price":199.0,"currency_code":"EUR","in_stock":true},{"title":"Chrome","offer_id":54884792762709,"sku":"FKWM1066","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0995\/9387\/9893\/files\/wilde-moto-cruiser-fork.jpg?v=1788859809","url":"https:\/\/hirondellebikeshop.com\/products\/wilde-moto-cruiser-fork","provider":"Hirondelle Bike Shop","version":"1.0","type":"link"}